| Interesting Bends | Component | Component | Notes |
| BlueKeyboard | R13 left | C1 right | crashes after a few notes |
| R1 left | R010 right | ||
| R1 left | R010 left | ||
| R008 left | R13 right | faint but buzzy | |
| R13 left | R013 right | affects timing | |
| R13 left | R015 right | affects timing |
Momentary mute and 1/4" audio jack added.
Power reset button.
Trying to solder wire to surface mount components: the wrong way to do it.
Burned up resistor above the black blob. Instrument no longer works.
Lessons Learned
Trying to solder a 22 gauge or 20 gauge wire to a SMC component is a bad idea: too much heat gets transferred to the component and it burns out.
Make sure you place components before drilling the case.